ZD96-21 Cold Galvanizing Spray
Tlhaloso
ZINDNSPRAY ke karolo e le 'ngoe e entsoeng ka tšepe e phahameng e tiileng, e nang le phofo ea zinki, motsoako oa motsoako le solvent.Ho lumellana le litlhoko tsa "BB-T 0047-2018 Aerosol Paint".
Likaroloana
● Ho roala ka tšepe ka 96% ea phofo ea zinki filiming ea eona e omeletseng, e fanang ka tšireletso e sebetsang ea cathodic le e sa sebetseng ea tšepe ea tšepe.
● Bohloeki ba Zinc: 99%
● E sebelisoa ke lera le le leng kapa liphahlo tse rarahaneng.
● Ho loantša mafome le boemo ba leholimo bo botle haholo.
● Kopo e bonolo, e omeletseng kapele.
Tšebeliso e khothalletsoang
1.Dry film zinc content 96%, with the same anti corrosion performance to hot dip & thermal spray zinc.
2.E sebelisoa e le mokhoa oa ho ama bakeng sa tšenyo ea lesela la zinki lits'ebetsong tsa setso tsa galvanizing.
3.E sebelisoa ke lera le le leng kapa primer e nang le seaparo se bohareng sa ZD & topcoats ho finyella litlhoko tse fapaneng tsa tšireletso.
'Mele Constants
| Mmala | zinki e bohlooho |
| Khanya | mat |
| Lintho tse tiileng tsa molumo | ＞45% |
| Boima ba 'mele (kg/L) | 2.4±0.1 |
| Sekhahla sa ejection | ≥96% |
| Khatello ea ka hare | ≤0.8Mpa |
| Sekhahla sa khaso ea maikutlo | 0.107kg/㎡(20microns DFT) |
| Sekhahla se sebetsang sa khaso | nahana ka ntlha e loketseng ea tahlehelo |
Litaelo tsa Tšebeliso
Phekolo ea substrate le bokaholimo:
Tšepe: ho phatloha ho hloekisitsoeng ho Sa2.5 (ISO8501-1) kapa bonyane SSPC SP-6, profaele e phatlohang Rz40μm~75μm (ISO8503-1) kapa sesebelisoa sa matla se hloekisitsoeng ho isa ho ISO-St3.0/SSPC SP3
Ho phahamisa bokaholimo ba masenke:
Tlosa mafura ka ho feletseng holim'a setsi sa ho hloekisa, hloekisa letsoai le litšila tse ling ka metsi a hloekileng a nang le khatello e phahameng, sebelisa sesebelisoa sa matla ho khabisa sebaka sa mafome kapa leloala, ebe u sebelisa le ZINDN.
Kopo & maemo a ho folisa
Mocheso oa tikoloho ea ts'ebeliso:-5 ℃-50 ℃
Mongobo o amanang le moea:≤95%
Thempereichara ea substrate nakong ea kopo le ho folisa e lokela ho ba bonyane 3 ℃ ka holim'a phoka
Tšebeliso ea kantle e thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerōle le matla
Thempereichara e phahame lehlabula, ela hloko ha u fafatsa ka ho omella, 'me u lule u e-na le moea nakong ea kopo le nako ea ho omisa libakeng tse moqotetsane.
Mekhoa ea kopo
1, Tlosa ka botlalo matheba a oli, matheba a metsi le lerōle likarolong tse tla penta.
2, Shake aerosol holimo le tlase, ka ho le letšehali le ka ho le letona, hoo e ka bang metsotso e 'meli pele u fafatsa, e le hore mokelikeli oa pente o ka tsoakana ka ho feletseng.
3, Ka sebaka se ka bang 20-30 cm ho tloha holim'a metsi ho tlotsoa, sebelisa monoana oa index ho hatella nozzle le ho fafatsa ka mokhoa o ts'oanang pele le pele.
4, Amohela li-sprays tse ngata, u sebelisa lesela le tšesaane metsotso e meng le e meng e 'meli, bakeng sa liphetho tse ntle ho feta ho fafatsa hang-hang.
5, Polokelo ka mor'a ts'ebeliso, ka kopo retelletsa aerosol fatše, u hatelle molomo ka metsotsoana e ka bang 3, 'me u hloekise pente e setseng ho thibela ho koala.
Ho omisa/ ho phekola
| Mocheso oa substrate | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| E ommeng | 1 hora | 45metsotso | 15 mets | 10 mets |
| Ka ho omisa | 3 lihora | lihora tse 2 | 1 hora | 45metsotso |
| Nako ea ho ikoetlisa | lihora tse 2 | 1 hora | 30 mets | 20 mets |
| Seaparo se latelang | Lihora tse 36 | Lihora tse 24 | Lihora tse 18 | Lihora tse 12 |
| Nako ea ho ikoetlisa | Bokaholimo bo lokela ho hloeka, bo omelle 'me bo se na letsoai la zinki le litšila pele bo busoa. | |||
Ho paka le ho boloka
| Ho paka | 420ml |
| flash point | >47℃ |
| Polokelo | E tlameha ho bolokoa ho latela melao ea puso ea libaka.Tikoloho ya polokelo e tlameha ho ba e ommeng, e phodileng, e nang le moya o hlwekileng mme e be hole le mehlodi ya mocheso le mollo.Setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata. |
| Shelf bophelo | lilemo tse 2 |