Karolo e le 'ngoe e tiileng ea mosebetsi o boima o thibelang kutu e entsoeng ka motsoako oa motsoako, phofo ea zinki, thepa e thibelang ho thella, coefficient ea anti-slip ≥0.55
Likaroloana
● Ho roala ka tšepe ka phofo ea zinki e fetang 90% filiming ea eona e omeletseng, e fanang ka tšireletso e sebetsang ea cathodic le e sa sebetseng ea litšepe tse entsoeng ka tšepe.
● Bohloeki ba Zinc: 99%
● E sebelisoa ke lera le le leng kapa liphahlo tse rarahaneng.
● Anti-slip coefficient ≥0.55
Tšebeliso e khothalletsoang
E sebelisoa haholo ka terene, tsela e kholo le borokho, matla a moea, mechine ea koung joalo-joalo.E ka nkela zinki sebaka sa ho fafatsa ka mocheso le coating e nang le zinki e ngata ea antiskid.
Litaelo tsa Tšebeliso
Mekhoa ea ts'ebeliso:
Sefafatsi se hlokang moea (se-air spray/air spray/brush/roller).
Ho roala borashe le rolara ho kgothaletswa feela bakeng sa seaparo sa mela, ho roala sebakeng se senyenyane kapa ho ama.
Phekolo ea substrate le holim'a metsi
Tšepe:ho phatloha ho hloekisitsoeng ho Sa2.5 (ISO8501-1) kapa bonyane SSPC SP-6, ho phatloha ha profil Rz40μm~75μm (ISO8503-1) kapa sesebelisoa sa matla se hloekisitsoeng ho fihlela bonyane ISO-St3.0/SSPC SP3
Theola bokaholimo ba masenke
Tlosa mafura ka ho feletseng holim'a setsi sa ho hloekisa, hloekisa letsoai le litšila tse ling ka metsi a hloekileng a nang le khatello e phahameng, sebelisa sesebelisoa sa matla ho khabisa sebaka sa mafome kapa leloala, ebe u sebelisa le ZINDN.
Kopo & maemo a ho folisa
1.Pot bophelo: se nang moeli
2.Mocheso oa tikoloho ea kopo: -5℃- 50℃
3.Mongobo o amanang le moea: ≤95%
4.Substrate mocheso nakong ea kopo le ho phekola e lokela ho ba bonyane 3 ℃ ka holim'a ntlha ea phoka
5. Ts'ebeliso ea kantle e thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerole le matla.
6.Mocheso o phahame hlabula, ela hloko ha u fafatsa ka metsi, 'me u lule u kena moea ka nako ea kopo le nako ea ho omisa libakeng tse moqotetsane.
Mekhahlelo ea kopo
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Sefafatsi sa moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.43–0.53 | 1.5 ho isa ho 2.5 | —- |
| Khatello ea molomo: | kg/cm2 | 150 ~ 200 | 3 -4 | —- |
| Thinner | % | 0～5 | 5-10 | 0～5 |
Nako ea ho omisa/ho fodisa
| Mocheso oa substrate | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ | |
| E ommeng | 2 lihora. | 1 hora. | 30 mets | 10 mets | |
| Ka ho omisa | 5 lihora. | 4 lihora. | 2 lihora. | 1 hora. | |
| Nako ea ho ikoetlisa | 2 lihora. | 1 hora. | 30 mets | 10 mets | |
| Seaparo se latelang | 36 lihora. | Lihora tse 24. | 18 lihora. | Lihora tse 12. | |
| Nako ea ho ikoetlisa | Bokaholimo bo lokela ho hloeka, bo omelle 'me bo se na letsoai la zinki le litšila pele bo busoa. | ||||
Seaparo se tlang pele le se latelang
Koetliso e tsoelang pele:Fafatsa ka ho toba holim'a tšepe ea tšepe kapa e chesang-dip galvanized kapa hot-sprayed tšepe ka phekolo ea holim'a Sa2.5 kapa St3.
Coat e latelang:ZD Sealer( seaparo sa mahareng) 、 ZD metal sealer(topcoat ea silevera)、 ZD Zinc- Aluminium topcoat, ZD Aliphatic Polyurethane , ZD Fluorocarbon, ZD Acrylic polysiloxane ....etc.
Ho paka le ho boloka
Ho paka:25kg
Flash point:>47℃
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Tikoloho ya polokelo e tlameha ho ba e ommeng, e phodileng, e nang le moya o hlwekileng mme e be hole le mehlodi ya mocheso le mollo.
Setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata.
Shelf bophelo:Se nang moeli