Pente e phahameng ea likarolo tse peli tsa epoxy, ho hanyetsa oli e tala, likhoerekhoere, metsi a leoatle le mobu, li-acid tse fokolang, metheo le matsoai a mang.
Likaroloana
1.Ho etsa filimi e thata, ea abrasion le e thibelang tšusumetso e nang le ts'oaetso e babatsehang ea ho kenella ka mor'a ho phekola.
2.Ho hanyetsa khoholeho ea nako e telele ke metsi, likhoerekhoere, metsi a leoatle le mobu.
3.Ho hanyetsa ho kenngoa ha oli e tala, khase / diesel, parafine ea sefofane, oli e tlotsang.
4.e babatsehang ho hanyetsa li-acid tse fokolang, metheo e fokolang, le matsoai a mang.
5.Ho ikamahanya hantle le maemo a filimi e koahetsoeng ka tšireletso ea cathodic.
Tšebeliso e khothalletsoang
E loketse ts'ireletso ea tšepe le konkreite libakeng tse senyang haholo le tikolohong e senyehang, joalo ka sebaka se ka tlas'a metsi, sebaka sa phapang ea maqhubu le sebaka sa maqhubu a maqhubu, liheke tsa hydraulic, liphaephe tse ka tlas'a lefatše, jj.
E sebelisetsoa ho thibela ho bola ha litanka tsa metsi le lebota le ka hare la litanka tsa polokelo.
Litaelo tsa Tšebeliso
Phekolo ea substrate le holim'a metsi
Tšepe e se nang letho:ho phatloha ho hloekisitsoeng ho Sa2.5 (ISO8501-1) kapa bonyane SSPC SP-6, ho phatloha ha profil Rz35μm~75μm (ISO8503-1) kapa sesebelisoa sa matla se hloekisitsoeng ho fihlela bonyane ISO-St3.0/SSPC SP3
Sebaka sa pele sa lithupelo tse koahetsoeng esale pele:Li-welds, li-firework calibration le tšenyo li lokela ho hloekisoa ho ISO-Sa2½, kapa sesebelisoa sa motlakase se hloekisoe ho St3.0
Tobetsa:Tlosa mafura ka botlalo 'me u hloekise letsoai le litšila tse ling.Ho molemo ho sebelisa blast cleaning ho tlosa mafome le lisebelisoa tse ling tse hlephileng.Sebelisa sesebelisoa sa matla ho bentša sebaka sa mafome, 'me u boele u boele u boele u sebelise thepa ena.
E sebetsang le ea Phekolo
● Mocheso oa tikoloho ea tikoloho e lokela ho ba ho tloha ho 5℃ ho ea ho 38℃, mongobo oa moea o lekanyelitsoeng ha oa lokela ho feta 85%.
● Mocheso oa substrate nakong ea kopo le ho phekola e lokela ho ba 3℃ ka holim'a phoka.
● Ho sebelisa kantle ho thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerōle le matla.
Bophelo ba pitsa
| 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 4hrs | 3hrs | 2hrs | 1 hora |
Mekhoa ea kopo
Sefafatsi se se nang moea, sefafatsi sa moea ha se khothalletsoe.
Ho roala borashe le rolara ho kgothaletswa feela bakeng sa seaparo sa mela, ho roala sebakeng se senyenyane kapa ho lokisa.
Mekhahlelo ea kopo
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.43–0.53 | —- |
| Khatello ea molomo | kg/cm2 | 150 ~ 200 | —- |
| Thinner | % | 0~10 | 5-10 |
Ho omisa le ho Fokotsa
| Mocheso oa holim'a substrate | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| E ommeng | 16hrs. | 8hrs. | 4hrs. | 2hrs |
| Ka ho omisa | 48hrs. | Lihora tse 24. | 12hrs. | 6hrs. |
| Ho fola ka botlalo | 14 matsatsi | 10 matsatsi | 6 matsatsi | 4 matsatsi |
| Nako ea ho khutlisa (Min.) | 48hrs. | Lihora tse 24. | 12hrs. | 6hrs. |
| Nako ea ho khutlisa (Boholo.) | 14 matsatsi | 10 matsatsi | 6 matsatsi | 4 matsatsi |
Ho roala ka pele le ho latela
Koetliso e tsoelang pele:Kopo e tobileng holim'a tšepe kapa epoxy e amohelehang.
Coat e latelang:Epoxy glass flake, Polyurethane, Fluorocarbon ... joalo-joalo.
Ha e lumellane le lipente tsa alkyd.
Ho paka, Polokelo le tsamaiso
Ho paka:motheo oa 25kg, moemeli oa ho phekola 5kg
Flash point:>25℃ (Motsoako)
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Tikoloho ya polokelo e lokela ho ba e ommeng, e phodileng, e nang le moya o hlwekileng le hole le mocheso le mehlodi ya mollo.Setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata.
Shelf bophelo:1 selemo tlas'a maemo a matle a polokelo ho tloha nakong ea tlhahiso.