Likarolo tse peli, lintho tse tiileng tse phahameng, zinki phosphate epoxy primer le jase ea moaho
Selelekela
Likarolo tse peli, tse tiileng haholo, zinki phosphate epoxy primer e entsoeng ka epoxy resin, zinc phosphate anti-rust pigment, solvent, agent e thusang le polyamide e phekolang.
Likaroloana
• Epoxy primer kapa ho haha seaparo ka mekhoa e sireletsang ea ho roala
• Ho hanyetsa ha kutu e ntle haholo ho pepesehela sepakapaka
• E phekola mocheso ho ea ho -5°C (23°F)
• Max.ho feta nako ea ho roala ha e felle
• Ho folisa ka potlako ha ho etsoa tšepe
• Mefuta e mengata ea lisebelisoa
Tšebeliso e khothalletsoang
Multi-purpose epoxy primer kapa pente e mahareng bakeng sa sebopeho sa tšepe le litšepe tse entsoeng ka masenke libakeng tse fapaneng tsa sepakapaka.
E loketse merero e mecha ea tšepe kapa ea ho lokisa.
Litaelo tsa Tšebeliso
Litlhare tse sebetsang tsa Substrate le Surface:
Tšepe: ho phatloha ho hloekisitsoeng ho Sa2.5 (ISO8501-1), ho phatloha ha profil Rz35μm~75μm (ISO8503-1)
E sebetsang le ea phekolo:
Mocheso oa tikoloho ea tikoloho e lokela ho ba ho tloha ho 5 ℃ ho isa ho 38 ℃, mongobo oa moea o lekanyelitsoeng ha oa lokela ho feta 85%.
Thempereichara ea substrate nakong ea kopo le pheko e lokela ho ba 3 ℃ ka holim'a ntlha ea phoka.
Bophelo ba pitsa
| 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 5 lihora. | 4 lihora. | 2 lihora. | 1.5hrs |
Mekhoa ea kopo
Sefafatsi se se nang moya/sefafatsi sa moya
Ho roala borashe le rolara ho kgothaletswa feela bakeng sa seaparo sa mela, ho roala sebakeng se senyenyane kapa ho ama.
Lisebelisoa tsa Parameters
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Sefafatsi sa moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.43～0.53 | 1.8～2.2 | —- |
| Khatello ea molomo | kg/cm2 | 150～200 | 3～4 | —- |
| Thinner | % | 0～10 | 10～20 | 5～10 |
Ho omisa le ho Fokotsa
| Mocheso oa mocheso oa substrate | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| E ommeng | 4hrs | 2hrs | 1 hora | 30metsotso |
| Ka ho omisa | Lihora tse 24 | 16hrs | 12hrs | 8hrs |
| Nako ea ho Koaela | 20hrs | 16hrs | 12hrs | 8hrs |
| Boemo ba ho koahela | Pele o sebelisa seaparo se hlahisoang, bokaholimo bo lokela ho ba bo hloekile, bo omme 'me bo se na letsoai la zinki le litšila. | |||
Ho roala ka pele le ho latela
Koko e tlang pele:Metsi a tšepe, hot-dip, spray ea mocheso e nang le kalafo ea bokaholimo ba ISO-Sa2½ kapa St3.Primer ea mabenkele e amohetsoeng, primer e ruileng ea zinki, epoxy primer….
Coat e latelang:Epoxy, polyurethane, fluorocarbon ... joalo-joalo.
Ha e lumellane le lipente tsa alkyd.
Ho paka & Polokelo
Pakete ea boholo:motheo oa 25kg, moemeli oa ho phekola 2.5kg
Flash point:>25℃ (Motsoako)
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Tikoloho ya polokelo e lokela ho ba e ommeng, e phodileng, e nang le moya o hlwekileng le hole le mocheso le mehlodi ya mollo.Piil e tlameha ho bolokoa e koetsoe ka thata.