Likarolo tse peli, resin ea tetra fluorocarbon, aliphatic isocyanate e phekotsoeng topcoat, boemo ba leholimo bo botle, ho boloka mebala le ho hanyetsa lik'hemik'hale, ts'ebetso ea ho itlhoekisa.
Likaroloana
1.Ho khabisa haholo, ts'ebetso e ntle ea anti-ultraviolet, ho hanyetsa boemo ba leholimo bo botle;
2.Filimi ea pente e khanyang ebile e hloekile, ha e bonolo ho silafatsoa ke litšila, 'me e na le ts'ebetso e ntle ea ho itlhoekisa.
3. High solids le VOC e tlase, ha ho na chlorine, fluorine content ea solvent soluble matter ha e ka tlase ho 24%.
4.Ho hanyetsa lik'hemik'hale tse ntle haholo, khanyetso e ntle ea permeability, khanyetso e ikhethang ea kutu.
Tšebeliso e khothalletsoang
Tšireletso e ntle ea indasteri le qetello ea mokhabiso, e loketseng meaho ea tšepe kapa bokaholimo ba konkreite libakeng tse fapaneng tse thata tsa sepakapaka, joalo ka meaho e meholo ea tšepe, marokho, sethala se lebopong la leoatle, marako a kantle a litanka tsa polokelo, meaho e meholo ea likepe, lisebelisoa tsa petrochemical, le lisebelisoa tsa mochini oa boenjiniere, jj. E loketse ka ho khetheha bakeng sa libaka tse nang le litlhoko tse phahameng haholo bakeng sa gloss le ho boloka mebala.
Litaelo tsa Tšebeliso
Litlhare tse sebetsang tsa Substrate le Surface:
Sebelisa sesebelisoa se loketseng sa ho hloekisa ho tlosa mafura le litšila tsohle tse holim'a substrate, 'me u boloke bokaholimo bo hloekile, bo omme ebile bo se na tšilafalo.
Sehlahisoa sena se tlameha ho sebelisoa holim'a seaparo se thibelang mafome se khothalelitsoeng ka har'a nako e boletsoeng ea ho tsosolosa.
Likarolo tse senyehileng tsa primer li tlameha ho phatloha ho Sa.2.5 (ISO8501-1) kapa ho phekoloa ka matla ho ea St3 standard, 'me pente e ka sehloohong e lokela ho sebelisoa likarolong tsena.
E sebetsang le ea Phekolo
1. Sebaka sa substrate se tlameha ho bolokoa se hloekile ebile se omme, 'me mocheso oa substrate o lokela ho ba 3 ° C ka holim'a phoka ho qoba condensation.
2.Sehlahisoa sena se ka boela sa itšoara le ho phekoloa ka mocheso o tlase ho -10 ° C, hafeela ho se na serame holim'a metsi.
3.Kopo ea kantle e thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerōle le matla.
4.Mocheso o phahame lehlabula, ela hloko ha u fafatsa ka ho omella, 'me u lule u le moeeng
5.nakong ea kopo le linako tsa ho omisa libakeng tse moqotetsane.
Bophelo ba pitsa
| 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 6 lihora. | 5 lihora. | 4 lihora. | 2.5hrs. |
Kopo
E loketse ho roala holim'a liphahlo tse fetileng tse kang epoxy kapa polyurethane, 'me e sebelisoa e le topcoat e sireletsang boemo ba leholimo e phahameng bakeng sa meaho ea tšepe kapa bokaholimo ba konkreite libakeng tse fapaneng tsa sepakapaka.
Bophelo ba Pitsa
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Sefafatsi sa moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.35–0.53 | 1.5 ho isa ho 2.5 | —- |
| Khatello ea molomo | kg/cm2 | 150 ~ 200 | 3 -4 | —- |
| Thinner | % | 0~10 | 10 - 25 | 5-10 |
Ho omisa le ho Fokotsa
| Substratemperature | -5 ℃ | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| E ommeng | 2hrs. | 1 hora | 45metsotso | 30metsotso | 20 mets |
| Ka ho omisa | 48hrs. | Lihora tse 24. | Lihora tse 12. | 8 lihora. | 4h |
| Min.Recoating karohano nako | 36 lihora. | Lihora tse 24. | Lihora tse 12. | 8 lihora. | 4h |
| Max.Recoating karohano nako | Matsatsi a 30 | ||||
Ho roala ka pele le ho latela
Pente e tlang pele:mefuta eohle ea epoxy, polyurethane intermediate pente kapa anti-rust primer, ka kopo sheba Zindn
Ho paka & Polokelo
Ho paka:motheo oa 25kg, moemeli oa ho phekola 2.5kg
Flash point:>25℃ (Motsoako)
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Sebaka sa polokelo
tikoloho e lokela ho ba e omileng, e phodileng, e nang le moya o hlwekileng mme e be hole le mocheso le mehlodi ya mollo.The
setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata.
Shelf bophelo:1 selemo tlas'a maemo a matle a polokelo ho tloha nakong ea tlhahiso.