Likarolo tse peli, tse tiileng tse phahameng, topcoat ea acrylic polyurethane, e phekotsoeng ka aliphatic isocyanate, e nang le matte ho gloss e ntle le ho boloka mebala.
Likaroloana
1.Ho khomarela ka mokhoa o motle, filimi e thata ea pente, ho hanyetsa phello e ntle, ho khanya ho babatsehang le ho boloka mebala, le ho kopanya tšireletso le mesebetsi e phahameng ea mokhabiso.
2.Excellent durability ka ntle, ho hanyetsa hantle pula ea acid, ho hanyetsa nako e telele liphetohong tse matla tsa leholimo la leoatle le khoholeho ea metsi a leoatle.
3.Ho hanyetsa hantle li-acids, alkalis, solvents, linako tsa ho fafatsa letsoai le metsi.
4.Good recoating tshebetso.
Tšebeliso e khothalletsoang
E loketse ho roala holim'a liphahlo tse fetileng tse kang epoxy kapa polyurethane, 'me e sebelisoa e le topcoat e sireletsang boemo ba leholimo e phahameng bakeng sa meaho ea tšepe kapa bokaholimo ba konkreite libakeng tse fapaneng tsa sepakapaka.
Litaelo tsa Tšebeliso
Litlhare tse sebetsang tsa Substrate le Surface:
Sebelisa sesebelisoa se loketseng sa ho hloekisa ho tlosa mafura le litšila tsohle tse holim'a substrate, 'me u boloke bokaholimo bo hloekile, bo omme ebile bo se na tšilafalo.
Sehlahisoa sena se tlameha ho sebelisoa holim'a seaparo se thibelang mafome se khothalelitsoeng ka har'a nako e boletsoeng ea ho tsosolosa.
Likarolo tse senyehileng tsa primer li tlameha ho phatloha ho Sa.2.5 (ISO8501-1) kapa ho phekoloa ka matla ho ea St3 standard, 'me pente e ka sehloohong e lokela ho sebelisoa likarolong tsena.
E sebetsang le ea Phekolo
Sebaka sa kopo se tlameha ho bolokoa se hloekile 'me se omme, 'me mocheso oa substrate o lokela ho ba 3 ° C ka holim'a phoka ho qoba condensation.
Sehlahisoa sena se ka boela sa sebetsa 'me sa phekoloa ka mocheso o tlase ho -10°C, ha feela ho se serame holim'a metsi.
Tšebeliso ea kantle e thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerōle le matla.
Mocheso o phahame lehlabula, ela hloko ha u fafatsa ka ho omella, 'me u lule u le moeeng
nakong ea kopo le nako ea ho omisa libakeng tse moqotetsane.
Bophelo ba pitsa
| 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 6 lihora. | 5 lihora. | 4 lihora. | 2.5hrs. |
Mekhoa ea kopo
Mokhoa oa kopo: Ho khothalletsoa ho fafatsa ntle le moea.
Brush le rolling li khothalletsoa feela bakeng sa seaparo sa stipe, ho roala sebakeng se senyenyane kapa ho lokisa.Le borashe bo bonolo-bristled kapa rolara e khutsoanyane bristled kgothaletswa ho fokotsa moea bubble.
Lisebelisoa tsa Parameters
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Sefafatsi sa moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.35–0.53 | 1.5 ho isa ho 2.5 | —- |
| Khatello ea molomo | kg/cm2 | 150 ~ 200 | 3 -4 | —- |
| Thinner | % | 0~10 | 10 - 25 | 5-10 |
Ho omisa le ho Fokotsa
| Substrate mocheso | -5 ℃ | 5℃ | 15 ℃ | 25 ℃ |
| E ommeng | 2hrs. | 1 hora | 45metsotso | 30metsotso |
| Ka ho omisa | 48hrs. | Lihora tse 24. | Lihora tse 12. | 8 lihora. |
| Min.Recoating karohano nako | 36 lihora. | Lihora tse 24. | Lihora tse 12. | 8 lihora. |
| Max.Recoating karohano nako | ho itšeha ha ho na moeli, sebaka se koahetsoeng se tlameha ho se be le tjhoko le litšila tse ling.E boloke e hloekile ebile e omme.Haeba ho hlokahala, etsa roughening e lekaneng pele u roala. | |||
Ho roala ka pele le ho latela
Pente e tlang pele:mefuta eohle ea epoxy, polyurethane intermediate pente kapa anti-rust primer, ka kopo sheba Zindn
Ho paka & Polokelo
Ho paka:motheo oa 20kg, moemeli oa ho phekola 4kg
Flash point:>25℃ (Motsoako)
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Sebaka sa polokelo
tikoloho e lokela ho ba e omileng, e phodileng, e nang le moya o hlwekileng mme e be hole le mocheso le mehlodi ya mollo.The
setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata.
Shelf bophelo:1 selemo tlas'a maemo a matle a polokelo ho tloha nakong ea tlhahiso.