Likarolo tse peli tsa polyamide adduct li phekotsoe, li-solids tse phahameng, pente e phahameng ea epoxy e hanyetsanang hantle le metsi, oli, lik'hemik'hale, le tšusumetso le thepa ea ho hanyetsa abrasion.
Likaroloana
1.Ho hanyetsa metsi ka mokhoa o babatsehang le ho hanyetsa mafome.
2.Ho hanyetsa lik'hemik'hale tse ntle le ho hanyetsa oli.
3.Ho khomarela hantle, ho hanyetsa tšusumetso, ho apara ho hanyetsa
Tšebeliso e khothalletsoang
Bakeng sa tšireletso ea tšepe le konkreite libakeng tse senyang haholo, e ka sebelisoa e le seaparo se bohareng kapa e le seaparo se ka holimo bakeng sa mehaho ea ka hare.
Litaelo tsa Tšebeliso
Phekolo ea substrate le holim'a metsi
Steel:ho phatloha ho hloekisitsoeng ho Sa2.5 (ISO8501-1) kapa bonyane SSPC SP-6, ho phatloha ha profil Rz50μm~100μm (ISO8503-1) kapa sesebelisoa sa matla se hloekisitsoeng ho isa bonyane ISO-St3.0/SSPC SP3
Likarolo tsohle tse tla koaheloa li tla hloeka, li omelle li se na litšila, 'me li tla hlahlojoa le ho tšoaroa ho latela ISO8504.
Sethala sa pele sa workshop se koahetsoeng esale pele:Li-welds, li-firework calibration le tšenyo li lokela ho hloekisoa ho Sa2.5 (ISO8501-1), kapa sesebelisoa sa matla se hloekisoe ho St3.0.
Toh up:Tlosa mafura ka botlalo 'me u hloekise letsoai le litšila tse ling.
Cbokaholimo bo holimo:Ho kenya sealer se loketseng ho tiisa li-pores tse ka holimo pele ho kopo.
Obokaholimo ba eona:ka kopo ikopanye le ZINDN.
E sebetsang le ea Phekolo
● Mocheso oa tikoloho ea tikoloho e lokela ho ba ho tloha ho 5℃ ho ea ho 38℃, mongobo oa moea o lekanyelitsoeng ha oa lokela ho feta 85%.
● Mocheso oa substrate nakong ea kopo le ho phekola e lokela ho ba 3℃ ka holim'a phoka.
● Ho sebelisa kantle ho thibetsoe maemong a leholimo a matla joalo ka pula, moholi, lehloa, moea o matla le lerōle le matla.
Bophelo ba pitsa
| 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| 4hrs | 3hrs | 2hrs | 1.5hrs |
Mekhoa ea kopo
Sefafatsi se se nang moea, sefafatsi sa moea ha se khothalletsoe.
Ho roala borashe le rolara ho kgothaletswa feela bakeng sa seaparo sa mela, ho roala sebakeng se senyenyane kapa ho lokisa.
Mekhahlelo ea kopo
| Mokhoa oa kopo | Yuniti | Sefafatsi se se nang moea | Borashe/Rolara |
| Nozzle orifice | mm | 0.43–0.53 | —- |
| Khatello ea molomo | kg/cm2 | 150 ~ 200 | —- |
| Thinner | % | 0~10 | 5-10 |
Ho omisa le ho Fokotsa
| Sebaka sa substrate mocheso | 5℃ | 15 ℃ | 25 ℃ | 35 ℃ |
| E ommeng | 16hrs. | 8hrs. | 4hrs. | 2hrs. |
| Ka ho omisa | 48hrs. | Lihora tse 24. | 12hrs. | 6hrs. |
| Ho fola ka botlalo | 14 matsatsi | 10 matsatsi | 6 matsatsi | 4 matsatsi |
| Nako ea nako ea ho kopanya hape (Mits.) | 48hrs | Lihora tse 24. | 12hrs. | 6hrs. |
| Nako ea nako ea ho kopanya hape (Boholo.) (no.2 layer) | 14 matsatsi | 10 matsatsi | 6 matsatsi | 4 matsatsi |
| Nako ea nako ea ho kopanya hape (Max.) (Sejase sa ka holimo) | 30 matsatsi | 20 matsatsi | 14 matsatsi | 7 matsatsi |
Ho roala ka pele le ho latela
Koetliso e tsoelang pele:Epoxy zinc phosphate, Epoxy zinc e ruileng, Epoxy primer, e ka boela ea sebelisoa ka ho toba holim'a tšepe e phatlohileng e hloekisitsoeng ho Sa2.5 (ISO8501-1).
Coat e latelang:Epoxy topcoat, Polyurethane, Fluorocarbon, Polysiloxane ... joalo-joalo
Ho paka & Polokelo
Ho paka:motheo oa 24kg, moemeli oa ho phekola 4kg
Flash point:>25℃ (Motsoako)
Polokelo:E tlameha ho bolokoa ho latela melao ea puso ea libaka.Tikoloho ya polokelo e lokela ho ba e ommeng, e phodileng, e nang le moya o hlwekileng le hole le mocheso le mehlodi ya mollo.Setshelo sa ho paka se tlameha ho bolokoa se koetsoe ka thata.
Shelf bophelo:1 selemo tlas'a maemo a matle a polokelo ho tloha nakong ea tlhahiso.